How to install hard drive and format hard drive--5MP PoE system
Step1: Turn off the NVR, unscrew it and remove the cover.
Step2: Plug the SATA and data cables into the corresponding ports
on HDD.
Step3: Place the HDD. (mind the cables and don’t twine)
Step4: Hold the hard drive and turn the NVR over, position the
screw holes on the HDD to the holes on NVR, screw and fix the HDD.
Step5: Right click the mouse, go to【Settings】-->【Disk】-->【Disk Management, click【Format】to format the hard drive.