Products
Store
Installation
Support
About Us

1. Connect the switches one by one, then connect the router and NVR with one of the switches.

 

2. Change the cameras IP to the same segment with the NVR’s LAN port.

Please go to Menu—Network—Basic to check the IP of the NVR:

Please download the software SearchTool and install it on your computer (connected to the same router):

http://onwote.com/Download#Tools

 

 

 

Please use SearchTool to detect the camera. Then check in the cameras and click Batch Edit IP. Click DHCP to enable DHCP of your camera or choose IP Batch Manually Setting to change the camera’s IP address to the same segment with your NVR’s IP manually.

e.g.: If your NVR’s IP is 192.168.1.16, please change the camera’s IP to 192.168.1.X(X can be numbers from 50-100) and each camera has a different IP.

 

3. Add cameras on NVR

Please go back to the monitor which is connected with the NVR. Go to Menu—Camera, click Add All on the top to add cameras. If you use 16ch/8ch NVR, please follow this video to add camera:

https://youtu.be/LJpi-d1seNA