How to change the image settings of your poe camera (flip image, change IR mode)

How to change the image settings of your poe camera (flip image, change IR mode)



1. Please install AjDevTools on your computer: http://www.onwote.com/download.php?id=40


2. a. If only have single poe cameras, please just power on the cameras and connect it to your router (same one with the one you connected with your computer).

b. If you have NVR, please connect one of your NVR’s poe port with your computer. If your computer doesn’t have a network port, please refer to option “a”.

1.png


3. Please open AjDevTools on your computer and search the cameras. Please double click the IP address to view the video and find the camera you need.


 4. Please right click your moue on the IP and choose Remote config—English

2.png

5. Please choose Media, then you will be able to change the image settings.

3.png





© 2017 ONWOTE All Rights Reserved.